Switch Configurations
LAN switches vary in their physical design. Currently, there are three popular configurations in use:
- Shared memory- This type of switch stores all incoming packets in a common memory buffer shared by all the switchports(input/output connections), then sends them out via the correct port for the destination node.
- Matrix- This type of switch has an internal grid with the input ports and the output ports crossing each other. When a packet is detected on an input port, the MAC address is compared to the lookup table to find the appropriate output port. The switch then makes a connection on the grid where these two ports intersect.
- Bus architecture- Instead of a grid, an internal transmission path (common bus) is shared by all of the ports usingTDMA. A switch based on this configuration has a dedicated memory buffer for each port, as well as anASICto control the internal bus access.
Advertisement